Perch Adjuster – allows you to retain the cable operated clutch lever when fitting a z-Start clutch. The perch adjust reduces the cable pull and fits directly on to the existing clutch perch. This is also used when requiring the 2 finger over-ride on brake kits. Note: Hydraulic clutches do not require the Perch Adjuster.

Two Finger Over Ride – allowing the rider to retain the clutch operation when mounting a brake kit on the bars. Must be used in conjunction with the Perch Kit (above).

Blanking kit  - when you remove the KTM and Gas gas clutch pipe this kit balnks off the hole to stop any mud fouling the plug.

Hot Start Levers   
This hot start lever is available for all bike models that would like to switch the hot start lever to the right hand side of the bike. It also is required for all Rekluse equipped rear hand brake systems

Fuel Screw (Kouba)    
The Kouba Fuel Screw, is the easy quick adjustment for your bikes fuel supply. Eliminates the need to carry a screwdriver to adjust your bikes air and fuel mixture.
Allows you to fine tune your fuel screw setting while the bike is running. A must have to prevent carb-induced stalling problems.